Share:
Oxygen Booster/Compressor System
Contact Us
Category:
Gas Transfer & Pressurization, Pressure Test & Gas Booster System, Industry: Aviation, Haskel Defense Solutions In The Sea, Haskel Defense Solutions In The Air
Quantity:
Oxygen Booster/Compressor System
Filling aircraft on-board O2 cylinders for commercial, military and private fleets. Transferring O2 into various high-pressure receivers for deep ocean diving support, commercial or military. There are just two examples of the uses for Model 26968 oxygen boosters that have provided cost savings and increased safety for many years. This model will pump from high- or mediumpressure sources and will also function effectively to collect and transfer the gas from partially depleted supply cylinders to “top off” other cylinders to maximum pressure. Conventional industrial, shipboard or contractor-type compressed air sources are normally used for power. All motive power and controls are completely pneumatic with no electrical connections required. The basic booster is two-stage, rated for continuous-duty compression ratios of over 15:1, intermittent to 40:1. A pneumatic control package continually monitors both inlet cylinder pressure and outlet receiver pressure, stopping the booster automatically when desired outlet or minimum inlet pressure is reached, permitting unattended operation.
Key Features
For any inquiry, please fill up inquiry form below and send to us.
Please see catalogue for more detail:
Filling aircraft on-board O2 cylinders for commercial, military and private fleets. Transferring O2 into various high-pressure receivers for deep ocean diving support, commercial or military. There are just two examples of the uses for Model 26968 oxygen boosters that have provided cost savings and increased safety for many years. This model will pump from high- or mediumpressure sources and will also function effectively to collect and transfer the gas from partially depleted supply cylinders to “top off” other cylinders to maximum pressure. Conventional industrial, shipboard or contractor-type compressed air sources are normally used for power. All motive power and controls are completely pneumatic with no electrical connections required. The basic booster is two-stage, rated for continuous-duty compression ratios of over 15:1, intermittent to 40:1. A pneumatic control package continually monitors both inlet cylinder pressure and outlet receiver pressure, stopping the booster automatically when desired outlet or minimum inlet pressure is reached, permitting unattended operation.
Key Features
- Drive is a low-friction, slow-speed-cycling air cylinder, designed for continuous duty without airline lubrication. Vented distance pieces insure hydrocarbon-free gas section operation. Highpressure oxygen seals are wear compensating, immune to sudden failure and operate completely non-lube, oil free.
- Very cold air (as low as -20° F) is a natural byproduct from the air-powered drive exhaust. This frigid exhaust air is channeled through a system of cooling jackets and an interstage cooler, resulting in high-pressure cylinder temperatures well below the limits needed for the long life of critical parts.
- Inlet gas supply pressure acts directly through the opposed-piston construction to assist the air drive during the compression stroke, conserving power required by the drive directly in proportion to the gas supply pressure.
For any inquiry, please fill up inquiry form below and send to us.
Please see catalogue for more detail:
Inquiry - Oxygen Booster/Compressor System
.png)